Pair Front Axle for 2017-2021 for 2018 2.4L

Please Check Your Axle Whether Suitable for Your Model

Features & Benefits:

In order to ensure proper fit.Axle is measured 100% after assembly

Threads are precision rolled to ensure proper fit when axle nut is installed

Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing

We Select Engineered (CSE) Technology ensures that all CV axles meet or exceed O.E. form, fit and function

High quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance

Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life

Splines are precision rolled to ensure proper fit of axle into the mating hub and transmission, which eliminates installation hassles

100% Neoprene boots are designed with additional bellows to resist bellow stress and ozone cracking, the leading cause of boot failure

How to replace your Axle:

This is a job most home mechanics could do in an afternoon, so read on for the basics of how to replace a CV axle

Block the wheels to prepare for jacking up the vehicle
Use your floor jack to elevate the vehicle and immediately secure the vehicle with jack stands
Remove the lug nuts and take off the wheel
Check to see that there is no pressure on the suspension from the struts or springs before taking off any of the tie rod ends or ball joints. If there is downward pressure from springs, you could seriously injure yourself when releasing suspension components
Detach the tie rod end and ball joints from the wheel carrier
Thread the axle nut back onto the axle so that it is flush with the end of the axle, so that you can use your hammer to release the axle from the center of the wheel hub
Remove the nuts or bolts from the transmission side of the CV axle and then pull the CV axle out carefully
Replace the axle using the reverse steps and be sure to torque all nuts and bolts to manufacturer specifications