For Toyota For Corolla 1.8L 2017-2019 Projector Headlights Assembly Pair Black

About this item
1,Super bright and wide illumination range: The integrated metalized reflectors of this headlight assembly increase light distance for better visibility & driving safety
2,Durability: The high-impact housing withstands shock and vibration. With fully sealed silicon prevents environmental damages including freezing, foggy, fading, corrosion, and provides reliable service in sorts of weather conditions such as rain, snow, or dust storms, enabling your car looks better and drive safer
3,DOT Compliance and safe Driving: To ensure driving safety for you and the oncoming driving circumstance, our headlights are DOT & SAE compliant. Our headlights provides clearer and further vision to see the wild animals, falling rocks or other obstacles at night. Reduce the possibility of danger.
4,Direct Bolt On Replacement For Your Original Headlights, No Wiring or Any Other Modification Needed
5,No Installation Guide or Instruction Included, Professional Installation is Highly Recommended
6,Package Includes: 1 Pair of Headlight Bulbs are not included

Fitment:

For Toyota Corolla Base 1.8L 2019
For Toyota Corolla CE 1.8L 2019
For Toyota Corolla L 1.8L 2017-2019
For Toyota Corolla LE 1.8L 2017-2019

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly