16Pcs For 03-07 G35 Front Control Arm Ball Joint Tie Rod End Sway Bar

1.Fitting the Following vehicle:

2003-2007 INFINITI G35
2003-2009 Nissan 350Z

2.Package Includes:

1x Front Upper Control Arm and Ball Joint - Driver Side
1x Front Upper Control Arm and Ball Joint - Passenger Side
1x Front Lower Control Arm - Forward Position - Passenger Side
1x Front Lower Control Arm - Forward Position - Driver Side
1x Front Lower Control Arm and Ball Joint Assembly - Rear Position Passenger Side
1x Front Lower Control Arm and Ball Joint Assembly - Rear Position Driver Side
2x Front Lower Ball Joints Assembly
2x Front Inner Tie Rod End
1x Front Sway Bar End Link - Passenger Side
1x Front Sway Bar End Link - Driver Side
1x Front Outer Tie Rod End - Passenger Side
1x Front Outer Tie Rod End - Driver Side
2x Rack and Pinion Bellow

3.Note

(1).Please check the Compatible Fitment Chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile

(2). Although some parts have grease fittings, other parts are factory sealed, but do not affect the fit and quality of the parts

(3).Please contact our customer services for targeted discount after all the items are received if you have reached any targeted discount thresholds, the terms of which is at the bottom of this page

10 Year Warranty

This item is backed by our 10-year warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only

Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation

Frequently Asked Questions

(1).Do I need to replace the control arm if the bushings are worn
Because the weight of the car is transferred through the control arm two rubber bushings are fitted at the pivot point and bolted to the frame. Road conditions and driving habits can contribute to the wear of these bushings which will become worn and fall apart. These bushing can be inspected by raising the car up and looking for an irregular configuration of the rubber center of the bushing. Many control arms have the ball joint manufactured into the arm which will be replaced along with the control arm itself. When one control arm is worn it is highly advised to replace the opposing arm

(2).What happens if a ball joint breaks
When a ball joint breaks, you will hear a mysterious noise inside your car wheel
Your car tire will wear-out since your alignment will be broken, and you will feel the car getting out of control
If the ball joint breaks completely, it can be separated, and things can turn sour quickly. The wheel will stop being nice and can even steer you off the road. It can be serious
Broken ball joints will seriously affect the steering and suspension. It can even result in your wheel falling off the car

(3).What happens if I don't replace ball joints

(4).Do I need to grease new ball joints
I would say it will be a wise decision if you grease your new ball joints. At least I will always grease a new one after the installation. Greasing a new ball joint will make it stronger and extend its lifetime because there is a minimal amount of grease inside. I suggest you do so after the first installation. Follow the instruction card

(5).Why should I get my tie rods inspected on a regular basis

(6).Vibrations

(7).Shaking
As the tie rods become further damaged, you will start to notice that the car itself will start to shake. This happens because the tires may start to wobble without you having full control over them. Although you should take your car into a mechanic at the first sign of tie rod problems, if you experience your car shaking you could be at risk for serious tie rod damage-which can cause accidents. Take your car into a mechanic if you experience this tie rod symptom

(8).Wandering

(9).What are the symptoms of a bad sway bar
Some of the common symptoms of a bad sway bar bushing or sway bar links going bad are: clunking noise, rattling noise, knocking uneven noise road, lack of stability when driving and noise going over speed bumps. poor handling during turns

(10).What happens when a sway bar breaks